Physical Address

304 North Cardinal St.
Dorchester Center, MA 02124

motorcycle exhaust

Guiding a motorcycle exhaust

Guiding a motorcycle exhaust is an essential task for many riders who want to enhance their bike’s performance and sound. The exhaust system is a crucial part of any motorcycle, as it is responsible for expelling the exhaust gases from the engine and reducing the noise level. In this guide, we will cover the steps you need to follow to guide your motorcycle exhaust.

1.Determine the Type of Exhaust System

The first step in guiding your motorcycle exhaust is to determine the type of motorcycle exhaust system you have. There are two main types of exhaust systems: the slip-on exhaust and the full system. The slip-on exhaust replaces the muffler only, while the full system replaces the entire exhaust system, including the header pipes.

2.Choose the Right Exhaust Material

The next step is to choose the right exhaust material for your motorcycle. There are various materials to choose from, including stainless steel, titanium, and carbon fiber. Stainless steel is the most common material and is affordable, durable, and resistant to corrosion. Titanium is lightweight and more expensive than stainless steel, while carbon fiber is even lighter and more expensive than titanium.

3.Select the Right Exhaust Style

Selecting the right exhaust style is an important decision when guiding your motorcycle exhaust. There are various styles to choose from, including straight-cut, slash-cut, and angled-cut. The style you choose will depend on your personal preference and the type of motorcycle you have.

4.Remove the Old Exhaust

Before you can install the new exhaust, you need to remove the old one. Start by removing the heat shields and the mounting brackets. Use a socket wrench to remove the bolts that attach the exhaust to the motorcycle. You may need to use penetrating oil to loosen the bolts if they are rusted or stuck.

5.Install the New Exhaust

Once you have removed the old exhaust, you can install the new one. Start by installing the mounting brackets and the heat shields. Then, attach the header pipes to the engine using new gaskets. Finally, attach the muffler or slip-on to the header pipes using new clamps or springs.

6.Adjust the Position of the Exhaust

After installing the new exhaust, you may need to adjust its position to ensure that it is aligned with the motorcycle’s frame and rear wheel. Use a level to ensure that the exhaust is straight and adjust the position as necessary. Tighten the mounting brackets and clamps to secure the exhaust in place.

7.Test the Exhaust System

Once you have installed the new exhaust, you should test the system to ensure that it is working properly. Start the motorcycle and listen for any unusual sounds or vibrations. Check for leaks by running your hand around the joints and connections. You may also want to take the motorcycle for a test ride to check for any performance improvements.


Guiding a motorcycle exhaust is a straightforward process that can enhance the performance and sound of your bike. By following these steps, you can choose the right exhaust system, install it correctly, and test it to ensure that it is working properly. Remember to wear protective gear, such as gloves and eye protection, when working on your motorcycle.